Setup and Secure Your BEC Wireless Modem - Version 2

  1. Open your Internet browser (Internet Explorer, Firefox, Safari, Chrome, etc.).
  2. In the address bar enter 192.168.1.254
  3. Enter admin for both the username and password when prompted.
  4. You should see the screen below. Click the Configuration link.
    Setup and Secure Your BEC Wireless Modem - Step 4
  5. In the Configuration menu select LAN.
    Setup and Secure Your BEC Wireless Modem - Step 5
  6. In the LAN menu select Wireless.
    Setup and Secure Your BEC Wireless Modem - Step 6
  7. Make the following settings:
    1. WLAN Service = Enable.
    2. Channel ID = Channel 9
  8. Click the Apply button.
    Setup and Secure Your BEC Wireless Modem - Step 8
  9. In the LAN menu select Wireless Security.
    Setup and Secure Your BEC Wireless Modem - Step 9
  10. Select WPA2-PSK in the drop-down menu next to Security Mode.
  11. Enter your desired wireless password where it says WPA Shared Key.
  12. Click the Apply button.
  13. Click on Save Config at the bottom of the page.
    Setup and Secure Your BEC Wireless Modem - Step 13
  14. Click on the Apply button.
    Setup and Secure Your BEC Wireless Modem - Step 14
  15. Click the OK button.
    Setup and Secure Your BEC Wireless Modem - Step 15