Set Up and Secure Your BEC Wireless Modem

    1. Open your Internet browser (Internet Explorer, Firefox, Safari, Chrome, etc.).
    2. In the address bar enter 192.168.1.254.
    3. Enter admin for both the username and password when prompted.
    4. You should see the screen below. Click the Configuration link.
      Enable Wireless on the BEC Modem - Step 4
    5. In the Configuration menu select LAN.
      Enable Wireless on the BEC Modem - Step 5
    6. In the LAN menu select Wireless.
      Enable Wireless on the BEC Modem - Step 6
    7. Click the radio button next to Enable for WLAN Service. Change the channel to 8. You can also scan the channel usage and pick an unused channel. Click the Apply button.
      Enable Wireless on the BEC Modem - Step 7
    8. Click the SAVE CONFIG button at the bottom of the page.
      Enable Wireless on the BEC Modem - Step 8
    9. Click the Apply button.
      Enable Wireless on the BEC Modem - Step 9
    10. After saving is complete click the RESTART button at the bottom of the page.
      Enable Wireless on the BEC Modem - Step 10
    11. Make sure that the radio button next to Current Settings is checked and click the Restart button.
      Enable Wireless on the BEC Modem - Step 11
    12. Once the modem is done counting down your wireless should be working.